Worn pavers made new again, from strip to final coat
Paver Restoration and Resealing in St Augustine Beach
Get a free paver restoration estimate in St Augustine Beach, and a contractor answers quickly at (904) 719-7441.
- Brings out deeper paver color
- Fresh joint sand helps lock pavers in place
- Gives weeds less room to grow
- Makes the surface easier to keep clean
- Free estimate, no obligation
Request a Free Estimate
Free, no obligation.
Who restores tired pavers in St Augustine Beach, and when will I hear back?
A local contractor restores and reseals pavers across St Augustine Beach, FL, and you will hear back within 1 business day, usually much sooner. The visit and the estimate are free, with no pressure to book. To begin, call (904) 719-7441.
Restoration is for pavers that a plain wash will not fix: cloudy or peeling sealer, joints that empty every storm, a few cracked pieces and color that has gone chalky. The goal is a surface that looks even again and holds together for the next few summers. Think of a driveway that looks patchy even after a rinse. To have one looked at, send the short estimate form.
Paver Sealing St Augustine Beach Is Proud to Serve Northeast Florida
What counts as paver restoration, and how is it different from a reseal?
A reseal puts a new coat on pavers that are clean and sound. Restoration starts earlier, with whatever stands between your pavers and a good coat. Venture Paver Sealing describes it as replacing damaged pavers, re-sanding joints and applying fresh sealer, and Safe Touch calls the work a two day restoration when joints are empty or the coat has failed. To see which one fits yours, call (904) 719-7441.
Assess the surface
A contractor measures the area and notes old sealer, empty joints, sunken spots, cracked pavers and white haze.
Strip what failed
Safe Touch says failed sealer is stripped first and not coated over, since a new coat will not bond well to the old film.
Repair and re-bed
Venture Paver Sealing lists replacing damaged pavers as part of a restoration, and Belgard warns that empty joints let the bedding layer break down.
Refill the joints
Fresh sand is swept in and settled. Safe Touch warns that a coat laid over empty joints lets weeds return.
Seal on a dry surface
Sealer goes on only when everything is dry, which keeps it from turning milky, per Safe Touch.
How can I tell if my sealer has failed or is just aging?
Aging sealer dulls but still beads water. A failed coat flakes, turns white or cloudy, peels at the edges or lets water soak in. Safe Touch says a failed coat is stripped before anything else goes on. When you are unsure, describe what you see when you send the short estimate form.
Why not just add another coat over the old one?
Belgard says sealer should go on no more than once in three years, with a maximum of two applications, because too much can discolor in sunlight. A new coat over a peeling one also sits on a weak base. That is why a contractor strips first when the film has failed. If a quote promises to coat over flaking sealer, ask about it by phone at (904) 719-7441.
How do pavers get re-sanded and resealed?
The order is wash, dry, sand, settle and seal. Safe Touch says summer storms wash joint sand out, so the sand is restored before sealing, and the sealer goes onto a dry surface. Belgard says joints should stay full of jointing sand, or the bedding layer under the pavers can break down and let them shift. To walk through the order for your driveway, send the short estimate form.
How long does a restoration take, and when can I use the driveway again?
Safe Touch and PD Home Pros both describe about two days for a full restoration. PD Home Pros lists about 24 hours before foot traffic and about 48 before furniture, so plan around cars and guests. Rain pushes dates back, because sealer needs dry weather. To set a date, call (904) 719-7441.
Is restoration worth doing before a sale or a new rental season?
Wikipedia reports 4,525 housing units in this city in the 2020 Census, with 31.3 percent vacant, so many homes here sit empty for stretches or turn over between stays. A driveway that looks even and clean helps those homes show well. It is also a simple repair to schedule while the house is empty. To plan around your calendar, send the short estimate form.
Can restoration fix pavers that have sunk or cracked?
A coat of sealer will never lift a low paver. PD Home Pros lists loose or sunken pieces as a price driver, and Venture Paver Sealing includes replacing damaged pavers in its restoration work. Pavers that rock under a car need their base fixed first. Ask whether leveling is in the written number when you call (904) 719-7441.
What does paver restoration cost in St Augustine Beach?
Restoration is priced after the joints and the old coat are inspected, so the table builds from published pieces: cleaning, clean sand and seal, and strip and restore. Prices run higher once stripping is involved. For a written figure on your own pavers, send the short estimate form.
A quote that skips the stripping on a failed coat may cost less today and fail sooner. Call (904) 719-7441 if you want a second read on a number you already hold.
Looking for something narrower? See travertine sealing, paver stain removal or paver cleaning and joint sand.
| Published piece | Rate per sq ft | 600 sq ft driveway | 1,000 sq ft pool deck |
|---|---|---|---|
| Cleaning only (PD Home Pros) | $0.30 to $0.50 | $180 to $300 | $300 to $500 |
| Clean, sand and seal (PD Home Pros) | $1.75 to $2.50 | $1,050 to $1,500 | $1,750 to $2,500 |
| Clean, sand and seal (Safe Touch) | $1.75 to $3.25 | $1,050 to $1,950 | $1,750 to $3,250 |
| Strip old sealer and restore (PD Home Pros) | $2.75 to $3.50 | $1,650 to $2,100 | $2,750 to $3,500 |
Restoration is priced after the joints and the old coat are inspected, so no single rate fits every driveway. Safe Touch says a strip and reseal costs more than a standard job when the old coat has failed and gives no figure, while PD Home Pros lists $2.75 to $3.50. Math uses rates read in November 2026, and your own written estimate sets the price.
What does a restored paver surface look like near the ocean in St Augustine Beach?
What is the paver restoration process, from stripping to the final coat?
Restoration adds work at the front of a normal sealing job. Call (904) 719-7441 to hear what yours would include.
1. Inspect and measure
The contractor looks at cloudy or peeling sealer, empty joints and cracked pavers, and measures the area.
2. Strip the old sealer
Failed sealer comes off first, since a new coat cannot go over it.
3. Wash and refill joints
The pavers are washed and dried, and fresh sand goes into the joints.
4. Reseal and walk it through
A new coat goes on dry pavers, and the contractor says when feet and cars can return.
What do homeowners ask before restoring pavers?
Cost, timing and whether to strip come up most. Quick answers are below, and (904) 719-7441 handles the rest.
Is it good to seal pavers in Florida?
Restoration is often where that question gets answered. If a coat has failed or joints keep emptying, sealing again makes sense, and Safe Touch lists two to three years between coats. If your pavers are in fair shape, a contractor can tell you whether to wait.
How do you resand and reseal pavers?
A contractor washes the surface, lets it dry, sweeps new sand into every joint, settles it and then seals. Safe Touch calls this a clean, re-sand and seal and not a same day spray. Pavers that have sunk get re-bedded before any of that.
How much does it cost to have pavers cleaned and sealed?
Safe Touch publishes $1.75 to $3.25 per square foot for clean, sand and seal in Northeast Florida, and PD Home Pros lists $1.75 to $2.50. Stripping an old coat and restoring costs more, with PD Home Pros listing $2.75 to $3.50.
Is it better to spray or roll paver sealer?
Neither wins on its own. A sprayer moves fast over flat ground, and a roller helps even out the coat and work edges. The bigger risk is sealer applied to a damp or dirty surface, which Safe Touch says is how jobs go wrong.
Can I just put another coat on top of the old sealer?
Not when the old coat is cloudy, peeling or patchy. Safe Touch says failed sealer gets stripped first and not coated over. Belgard adds that sealer should go on no more than once in three years, since extra sealer can discolor in sunlight.
How long does a paver restoration take at a beach side home?
Both Safe Touch and PD Home Pros describe a restoration as about two days, because of the stripping, the joint work and the dry time between steps. A small walk can go faster.
Will restoration fix pavers that sank or rock underfoot?
Only if repairs are part of the job. Venture Paver Sealing lists replacing damaged pavers and re-sanding as part of a restoration, and PD Home Pros says loose or sunken pieces move the price. Ask whether leveling is in the number.
How soon can cars and furniture go back on restored pavers?
PD Home Pros lists about 24 hours for foot traffic and 48 for furniture on its own jobs. Cars usually wait longer, so ask your contractor for a date in writing.
Want your pavers restored before the next storm season?
Use the form or call, and a local company writes back within 1 business day, usually much sooner.
Free, no obligation